فهرست مقالات مجلات
ردیف
عنوان مقاله
نویسنده/نویسندگان
عنوان مجله
تاریخ انتشار
926
Experimental Investigations On Fatigue Crack Growth of Repaired Thick Aluminium Panels in Mixed - Mode Conditions
حسین حسینی تودشکی,سعید بخشنده,بیژن محمدی سنگجوئی,حمیدرضا داغیانی
Composite Structures
1385/6/10
927
geometric non -Linear Analysis of Imperfect Composite Laminated Plates , Under end Shortening and Pressure Loading, Using Finite Strip Method
حمیدرضا اویسی,سیدامیرمهدی قنادپور
Composite Structures
1385/6/10
928
Post -Buckling Behavior of Composite Laminated Plates Under end Shortening and Pressure Loading, Using Two Versions of Finite Strip Method
حمیدرضا اویسی,سیدامیرمهدی قنادپور,قدرت اله مرادا
Composite Structures
1385/6/10
929
Geometric Non-Linear Analysis of Channel Sections Under end Shortening Using Different Versions Of the Finite Strip Method
حمیدرضا اویسی,سیدامیرمهدی قنادپور
Computers and Structures
1385/2/11
930
Flow Into An Arterial Branch Model
مهران تاج فر
Journal of Engineering Mathematics
1384/12/10
931
Numerical Study on Combustion of H2-O2 in a Supersonic Reactive Expansion in a Nozzle
محمد پزشکی,صادق تابع جماعت,ناصر سراج مهدی زاده
COMBUSTION THEORY AND MODELLING
1384/11/12
932
large deflection behavior of functionally graded plates under pressure loads
سیدامیرمهدی قنادپور,محمدمهدی علی نیا
Composite Structures
1384/10/11
933
In-Flight Thrust Measurements of Propeller-Driven Airplanes
مهدی سبزه پرور
JOURNAL OF AIRCRAFT
1384/9/17
934
Geometric Non-Linear Analysis of Composite Laminated Plates With Initial Imperfection Under end Shortening, Using Two Versions of Finite Strip Method
حمیدرضا اویسی,سیدامیرمهدی قنادپور,قدرت اله مرادا
Composite Structures
1384/9/10
935
An Investigation on The Post -Buckling Behavior of Symmetric Cross -Ply Laminated Plates Using a Semi- Energy Finite Strip Approach
حمیدرضا اویسی,سیدحسن عصایی
Composite Structures
1384/9/10
936
Geometric Non -Linear Analysis of Thin Flat Plates Under end Shortening, Using Different Versions of the Finite Strip Method
حمیدرضا اویسی,سیدامیرمهدی قنادپور
International Journal of Mechanical Sciences
1384/9/10
937
Parametric Meshless Galerkin Method
حسین حسینی تودشکی,مهدی موسیوند ارزانفودی
International Journal for Numerical Methods in Engineering
1384/8/6
938
Experimental Fatigue Crack Growth and Crack- Front Shape Analysis of Asymmetric Repaired Aluminium Panels With Glass/ Epoxy Composite Patches
حسین حسینی تودشکی,قاسم صادقی,حمیدرضا داغیانی
Composite Structures
1384/7/9
939
Numerical and experimental studies of injection modeling for flame-holding in surpersonic combustion
صادق تابع جماعت
Journal of Propulsion and Power
1384/4/9
940
Unstructured moving grids for implicit calculation of unsteady compressible viscous flows
علیرضا جهانگیریان,مصطفی هادی دولابی
International Journal for Numerical Methods in Fluids
1384/1/21
941
Particle collision effect in a vertical pipe developing turbulent gas _ solid flow
مجید صفاراول,حسن بصیرت تبریزی,زهره منصوری,پیام رمضانی نمین,گودرز احمدی
International Journal of Heat and Mass Transfer
1383/10/10
942
Direct simulations and modelling of basic three-dimensional bifurcating tube flows
مهران تاج فر
Journal of Fluid Mechanics
1383/8/11
943
Three-dimensional process cycle simulation of composite parts manufactured by resin transfer modeling
اکبر شجاعی سقرلو,سیدرضا غفاریان عنبران,سیدمحمدحسین کریمیان
Composite Structures
1383/6/11
944
An experimental study of saturated and unsaturated permeabilities in resin transfer modeling based on unidirectional flow measurements
اکبر شجاعی سقرلو,تروچو,سیدرضا غفاریان عنبران,سیدمحمدحسین کریمیان
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
1383/6/11
945
Experimental and numerical aerodynamic analysis of a satellite launch vehicle with strap _on boosters
محمود مانی,ارش نقیب لاهوتی,مهدی نظری نیا
Aeronautical Journal
1383/4/11
946
Numerical simulation of three-dimensional mold filling in resin transfer molding
اکبر شجاعی سقرلو,سیدرضا غفاریان عنبران,سیدمحمدحسین کریمیان
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES
1382/8/10
947
Simulation of the three - dimensional non - isothermal mold filling process in resin transfer molding
اکبر شجاعی سقرلو,سیدرضا غفاریان عنبران,سیدمحمدحسین کریمیان
COMPOSITES SCIENCE AND TECHNOLOGY
1382/7/9
948
معرفی مکانیزم جدید تاخوردگی در دیواره‌های هانی کمب تحت بارگذاری شبه استاتیکی و تعیین استحکام تاخوردگی کامل هانی کمب
جمال زمانی,غلامحسین لیاقت,مجتبی صدیقی,حمیدرضا داغیانی
مهندسی مکانیک امیرکبیر (امیرکبیر سابق)
1382/5/15
949
Modeling and simulation approaches in resin transfer molding process: a review
اکبر شجاعی سقرلو,سیدرضا غفاریان عنبران,سیدمحمدحسین کریمیان
POLYMER COMPOSITES
1382/5/10
950
Numerical analysis of controlled injection strategies in resin transfer molding
اکبر شجاعی سقرلو,سیدرضا غفاریان عنبران,سیدمحمدحسین کریمیان
JOURNAL OF COMPOSITE MATERIALS
1382/3/11